高工作电压小电压电流耐压试验检测仪（耐弧光耐压试验检测仪）-（计算出来机管理）

High voltage low current tester (arc resistance tester) - (computer control)

服务名称大全：耐电弧试验机

Product name: electric arc resistance tester

產品应用：NDH-A

Product model: NDH - A

达到标准的：GB/T 1411-2002《固状接地原料耐高压得过低直流电电孤蓄电池充电的检验》（就是指IEC  61621-1997）及ASTM D495等规范的标准规划打造的，并完全符合IEC 149、UL 746A等经过多次实验发现技术

Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc

一 概述

一An overview of the

包括适合超范围及性能：

本实验室检测机是采用app于电机的、电器元件设备和家装电器元件设备等行业领域的电焊工用朔料材质、聚酯树脂胶胶和电耐压带漆等电耐压带建材的耐弧光耐热性鉴定，主使用在固体颗粒电耐压带建材如：朔料材质、pet薄膜、聚酯树脂胶、白云母、陶瓷制品、钢化玻璃、电耐压带油、电耐压带漆、瓦楞纸板等导电介质的耐弧光耐热性检验；

本冲击冲击试验机由估算机把控好加载，也可以展示目前测试操作性形态及测试操作性日期，测试操作性完结后并保留目前测试操作性数据表格，并可word打印.细则试验评估报告。

Main scope of application and features:

This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;

This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report 

二 功能特点

1 机器为左右两合二为一设备构造，下处为操作步骤系统化，顶部为冲击恒温恒湿试验箱。

2 本货品适用*新智慧操纵高技术，完成选定 软件程序（IEC或ASTM）可一键进行试验台，并在笔记本安卓手机体现 耐压试验方式和最终结果。

3 **性优良，抗串扰作用强，测试图片控制精度提高。

二：Functional features：

1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.

2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.

3 good safety performance, strong anti-interference ability, high test precision. 

三 主要技术参数

1 脉冲通断时期精度：需小于 ±10ms

2 调压器使用量：2kVA

3 额定值耐压试验工作电压：12.5kV

4 校正相电压精确：±3%

5 瞬时电流操控准确度：±10%  感应电流估测gps精度：1.5%

6 电级对试件材料阻力：（0.5±0.05）N

7 电级的原材料：钨棒

8 电级高度：（6.35±0.1）mm（IEC）

               （6.0±0.1）mm（ASTM）

9 采用区域温暖：（23±2）℃

10 的使用室内环境干湿度：（50±5）%

11 电：220V±5%  50Hz  10A

12 耐压试验    方式 ：   新国标/美标/10 mA 间断性/20 mA 多次/30 mA重复/40 mA反复

13 实验室检测系统程序如下图所示：

Three main technical parameters：

Error: 1 arc on-off time less than plus or minus 10 ms

Transformer capacity: 2 kva

3 test voltage rating: 12.5 kV

4: test voltage accuracy + / - 3%

5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%

6 electrode pressure on sample: (0.5 + 0.5) N

7 electrode materials: tungsten rods

8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)

9 using the environment temperature (23 + 2) ℃

10 use environment humidity: (50 + 5) %

Power supply: 220 v + 5% for 50 hz 10 a

Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous

13 test procedure is as follows:

Procedures section of the arc current

MA arc on-off time s the program s test total duration time s

IEC 61621 ASTM D495

1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s

2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s

3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s

4 consecutive 10 to 60, 240

5 20 consecutive 60, 300

30 consecutive 6 to 60, 360

7 consecutive 40 to 60, 420 

四  配置

Four configuration：

Serial number name number note

01 arc resistance tester

02 a electrode system

03 electrode bearing a set

04 a set of power cable

05 ground put a rod

06 milliammeter current one

7 a set of computer measurement and control software

08 specimen holder a

09 electrode distance standard 2 blocks

Standard 2 blocks of 10 Angle

11 ceramic pieces 2 pieces

12 one brand inkjet printer

13 1 computer brand

14 1 instruction manual

15 1 certificate

五 厂品型號：

NDH-A    耐脉冲实验设计仪-微机管控

NDH-B    耐电弧焊接可靠性试验仪-触控屏操控

Five product model:

NDH - A arc resistance tester - microcomputer control

NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询！